Control valves, pressure regulators and safety valves for hygiene applications
Control valves for all industrial applications
Control valves, pressure regulators and safety valves are the most important actuators in process circuits for the targeted control of processes. The correct design and precise dimensioning for plant-specific conditions is decisive for the optimum operation of a plant. Whether for liquids, gases or steam, for contaminated or high-purity media, FLUVIUS offers a wide range of control and safety valves adapted to your process conditions for almost all industrial applications.
Control valve RV9 • Pharma & Biotech
| Dimensions: | DN 08 – 50 |
| Nominal pressure: | PN 10 |
| Temperature: | up to 250 °C |
| Plug: | parabolic plug |
| Kvs: | 0,1 - 40 m3/h |
| Characteristic: | linear, equal percentage |
| Rangeability: | 50:1 |
| Materials: | 1.4435 |
| Actuator: | pneumatic, electric |
| Applications: | Liquids, gases, steam for medium flow rates |
| Wetted surfaces: | Ra ≤ 0.6 μm |
Control valve RV391, food and beverage
| Dimensions: | DN 15 – 150 |
| Nominal pressure: | PN 10 – 25 |
| Temperature: | up to 135 °C |
| Plug: | parabolic plug |
| Kvs: | 2,5 - 260 m3/h |
| Characteristic: | linear, equal percentage |
| Rangeability: | 40:1 |
| Materials: | 1.4404 |
| Actuator: | pneumatic, electric |
| Applications: | Liquids, gases, steam for medium flow rates |
| Wetted surfaces: | Ra ≤ 0.8 μm |
Pressure reducing valve DM152
| Dimensions: | DN 15 – 50 |
| Nominal pressure: | PN 10 |
| Temperature: | up to 180 °C |
| Inlet pressure: | 8 bar |
| Setting ranges: | 0,3-1,1 / 0,8-2,5 / 1-5 bar |
| Kvs: | 2 – 7 m3/h |
| Materials: | 1.4404, 1.4435 |
| Diaphragm: | FKM, PTFE-protection foil |
| Seal: | FEPM, metallic |
| Applications: | Liquids, gases, steam for medium flow rates |
| Wetted surfaces: | Ra ≤ 0,25 / 0,4 / 0,6 μm |
Pressure reducing valve DM462
| Dimensions: | DN 25 – 80 |
| Nominal pressure: | PN 10 |
| Temperature: | up to 180 °C |
| Inlet pressure: | 8 bar |
| Setting ranges: | 0,3-1,1 / 0,8-2,5 / 1-5 bar |
| Kvs: | 4 – 70 m3/h |
| Materials: | 1.4404, 1.4435 |
| Diaphragm: | EPDM,FKM, PTFE-Schutzfolie |
| Seal: | FEPM, metallic |
| Applications: | Liquids, gases, steam for medium flow rates |
| Wetted surfaces: | Ra ≤ 0,25 / 0,4 / 0,6 μm |
Pressure reducing valve DM582
| Dimensions: | DN 20 – 50 |
| Nominal pressure: | PN 40 |
| Temperature: | up to 130 °C |
| Inlet pressure: | up to 40 bar |
| Setting ranges: | 0,8-2,5 / 2-5 / 4-8 / 6-12 bar |
| Kvs: | 1,4 – 4,2 m3/h |
| Materials: | 1.4404, 1.4435 |
| Diaphragm: | EPDM,FKM, PTFE-Schutzfolie |
| Seal: | EPDM, FKM, NBR, PTFE |
| Applications: | Liquids, gases, steam for medium flow rates |
| Wetted surfaces: | Ra ≤ 0,6 μm |
Back pressure regulator UV3.8
| Dimensions: | DN 15 – 100 |
| Nominal pressure: | PN 16 |
| Temperature: | up to 130 °C |
| Inlet pressure: | up to 40 bar |
| Setting ranges: | 0,8-2,5 / 2-5 / 4-10 bar |
| Kvs: | 3,5 – 32 m3/h |
| Materials: | 1.4404, 1.4435 |
| Diaphragm: | EPDM,FKM, PTFE-Schutzfolie |
| Seal: | metallic |
| Applications: | Liquids, gases, steam for medium flow rates |
| Wetted surfaces: | Ra ≤ 0,6 μm |
Safety valve SV B2
| Dimensions: | DN 10 – 50 |
| Nominal pressure: | PN 10 |
| Temperature: | up to 250 °C |
| Set pressure: | up to 10 bar |
| d0: | 10 – 50 mm |
| Materials: | 1.4435 |
| Diaphragm: | PTFE |
| Seal: | EPDM, FFKM |
| Applications: | Liquids, gases, steam for medium flow rates |
| Wetted surfaces: | Ra ≤ 0,38 μm |
Vacuum relief valve VV34
| Dimensions: | DN 20 – 100 |
| Nominal pressure: | PN 10 – 40 |
| Temperature: | up to 250 °C |
| Set pressure: | -0,05 – 0,95 |
| Kvs: | 1,5 – 70 m3/h |
| Materials: | 1.4404, 1.4435 |
| Diaphragm: | – |
| Seal: | EPDM, FKM, metallic |
| Applications: | Liquids, gases, steam for medium flow rates |